CHATILLON DG MECHANICAL FORCE GAUGE: Capacities from 200# to 500#. Tension and Compression.
The DG Series has a force measurement accuracy of better than 0.5% full scale and included mechanical overload protection. The gauge is available in lbf, kgf and N units. The gauge comes with a Certificate of Calibration with NIST data, accessories and carrying case.

CHATILLON DFE FORCE GAUGE: Capacities from 2# to 500#. Tension and Compression. Accuracy +/- 0.25% of full scale. Statistical Calculations Standard.
Compact, easy-to-use force gauge designed for economy applications without compromising functionality. Ideal for handheld or test stand applications. Loads are displayed in ozf, gf, lbf, kgf and N units. Uncertainty data per ISO/IEC 17025 is supplied standard.

CHATILLON DFS SERIES DIGITAL FORCE GAUGE: Capacities from 0.5 x 0.0001 lbf to 500 x 0.05 lbf
Designed for handheld or test stand applications. Equipped with integral loadcells or smart remote sensors for load measurement and torque measurement. Measurement accuracy is better than 0.1% full scale. Supports normal and peak readings, high/low limits, setpoints, pass/fail results, statistical results, load averaging, load comparisons, % and sharp break detection, loadcell actuation and direction. Loads are displayed in ozf, gf, lbf, kgf and N units.

CHATILLON DFS-R SERIES: Digital Force Gauge with Dedicate Remote Loadcell. Capacities up to 1000 lbf, 5 kN
For handheld or test stand applications. Measurement accuracy is better than 0.1% full scale. Normal and peak readings, high/low limits, setpoints, pass/fail results, statistical results, load averaging, load comparisons, % and sharp break detection, sensor actuation and direction. Measurements are displayed in ozf, gf, lbf, kgf and N units.

CHATILLON DFS-R-ND SERIES: Digital Indicator for Load and Torque Measurements
Supplies accurate load and torque measurement in a common gauge. For handheld or test stand applications, the DFS-R-ND may be equipped with smart loadcells or torque sensors. The auto-recognition feature knows whether a load or torque measurement is required. Measurement accuracy is better than 0.25% full scale (higher accuracy available).

MARK-10 SERIES 4: Including MESUR Lite Basic data acquisition software
Series 4 digital force gauges are designed for tension and compression force testing in numerous applications across virtually every industry, with capacities from 0.12 lb to 500 lb (0.5 N to 2500 N). The gauges feature a sampling rate of 3,000 Hz, producing accurate results under a wide range of test conditions. Accuracy is ±0.2% of full scale ±1 digit, and resolution is 1/2000.

MARK-10 SERIES 5: Including MESUR Lite Basic data acquisition software
Series 5 advanced digital force gauges are designed for tension and compression force testing in numerous applications across virtually every industry, with capacities from 0.12 lb to 500 lb (0.5 N to 2500 N). Feature a sampling rate of 7,000 Hz, producing accurate results even for quick-action tests. Accuracy is ±0.1% of full scale ±1 digit, and resolution is 1/5000.

MARK-10 SERIES CG: MESURgauge Software to tabulate, graph, and analyze test data
Ideal for heavy duty spring testing, destructive testing, and other force measurement applications requiring up to 1,000 lb of tensile or compressive force. These force gauges include all the advanced features of the Series BG, and are housed in ultra-rugged reversible aluminum housings for years of use in laboratory or factory environments.

MARK-10 SERIES MG: Economical Digital Force Gauges
For push and pull testing up to 500 lbF. Aluminum housing allows for hand-held use or test stand mounting. Pushbuttons easily select units of measurement, reset zero, and recall tensile and compressive peak loads. Compatible with all Mark-10 force measurement test stands and gripping fixtures.

MARK-10 MODEL BGI: Universal Force / Torque Gauge
Force and torque measurement flexibility with all the features of the Series BG, coupled with compatibility with a wide selection of interchangeable sensors. The BGI is a solution for many force and torque testing applications. All sensors are interchangeable and don't require additional configuration or calibration.