REQUEST A QUOTE

Ricelake CLS Forklift Scale


Using a forklift to transfer cargo from a warehouse to a floor scale, and then to a final destination, wastes time, money and floor space.  Now you can weigh, transfer and collect data in one efficient operation and reassign the space previously occupied by the floor scale.  Rice Lake’s CLS-680/920i cargo lift scales save operator time, equipment costs and eliminates the middle step.

The 802.15 wireless load cell kit scale-to-indicator system provides complete freedom from cable interference with the forklift mast.  Operators steer clear of the cost and downtime associated with damaged cables.  The lithium-ion smart battery supplies power to the scale carriage for 24 continuous hours, requiring only eight hours to fully recharge.

Real-time data transmission from scale to indicator to front office.  Wireless local area network communication from the indicator directly to your warehouse management system delivers real-time, accurate information and documentation.  The optional WLAN electronics are stored inside the indicator for extra protection, leaving only the antenna extended beyond the enclosure.   From simple to complex, the CLS-680/920i cargo lift scales can save you time and eliminate steps.

Call 1-800-362-0364 or email: [email protected] for pricing, demo, or more information.

Download Sell Sheet for full details and specs

 

Description

Ricelake CLS Forklift Scale

  • Scale Carriage
    -Compatible with Class II (16 in H) or III (20 in H) forklift cleat type carriages
    -Out of level NTEP Certified tolerance at seven degrees pitch and roll, three degrees side to side
    -1- 1/2 in thick front and back painted steel plates coupled by four flexures
    -Top cleats are welded, pinned and bolted
    -Welded centering pin
    -Two 5,000 pound s-beam load cells
    -Updated iQube2® junction box with inclinometer
    -Molded coiled cable, up-to 15 ft uncoiled
  • CLS-680
    – NTEP Certified
    – Machined aluminum enclosure with rounded corners
    – Six-digit, seven segment LED display
    – Battery backed time and date
    – On/Off power switch
    – 9-36 VDC power supply
    – Cabled or cable-less
    – Two serial ports: RS-232, one reserved for CLS
    – Wi-Fi
    – Bluetooth®
  • 920i Indicator
    -(W x H) 4.6in x 3.4in, back lit LCD graphical display (320 pixels x 420 pixels)
    -Standard user program with data collection and limited transaction storage.  See operators guide for more details.
    -Front panel calibration or calibrate through iQUBE2® junction box using Revolution® software
    -On/Off switch to conserve forklift battery life
    -Painted mild steel enclosure
    -Two piece top cage indicator mounting assembly with vibration mounts
    -Two available RS-232 ports for added options of scanner, Wi-Fi or printer
    -10-60 VDC power supply for use on propane or electric forklifts
  • Presale Requirements
    -Provide completed forklift questionnaire for quotation. A pre-installed load backrest on the forklift may interfere
    with flexures or wireless load cell interface option
    -Compatible with most Class II and Class III forklift attachments, consult factory
  • Installation Recommendations
    -When installing a forklift scale on an electric forklift, static discharge protection must be present on the forklift
    and install a chasis mount power conditioner to protect forklift electronics.
    -When installing a forklift scale, OSHA requires the end user to de-rate the lift capacity of the forklift;
    FORKLIFT QUESTIONNAIRE
Go to Top